Control system
The cleaning process is carried out by the controller (PLC) control and monitoring, based on differential pressure or time
control, anti-cleaning.
Failure occurs, a warning signal, corresponding to automatically open or close the action.
Cleaning mode
Manual control, time control, pressure control three kinds.
The priority is manual control, pressure control, time control
The HEY series performance characteristics of the filter
A single flow: 50 ~ 1000t / h;
The maximum operating temperature is 70 degrees higher temperature need to be specially made;
Filtration precision: 50 ~ 4500μm;
Working pressure: 1.0MPa, 1.6MPa, 2.5MPa, 4.0MPa;
Minimum working pressure: 0.1MPa;
Cleaning time is 15 ~ 60s, can be set in accordance with the actual situation of the site;
Cleaning pressure loss is 0.01MPa;
Control modes: manual, time pressure;
Operating voltage: 3 phase 220/380/440VAC 50/60Hz
The HEL series performance characteristics of the filter
A single flow: 50 ~ 1800t / h;
The maximum operating temperature is 70 degrees higher temperature need to be specially made;
Filtration precision: 50 ~ 4500μm;
Working pressure: 1.0MPa, 1.6MPa, 2.5MPa, 4.0MPa;
Minimum working pressure: 0.1MPa;
Cleaning time is 15 ~ 60s, can be set in accordance with the actual situation of the site;
Cleaning pressure loss is 0.01MPa;
Control modes: manual, time pressure;
Operating voltage: 3 phase 220/380/440VAC 50/60Hz
The HET series performance characteristics of the filter
A single flow: 50 ~ 6500t / h;
The maximum operating temperature is 70 degrees higher temperature need to be specially made;
Filtration precision: 50 ~ 4500μm;
Working pressure: 1.0MPa, 1.6MPa, 2.5MPa, 4.0MPa;
Minimum working pressure: 0.1MPa;
Cleaning time is 15 ~ 60s, can be set in accordance with the actual situation of the site;
Cleaning pressure loss is 0.01MPa;
Control modes: manual, time pressure;
Operating voltage: 3 phase 220/380/440VAC 50/60Hz
The HEM series performance characteristics of the filter
A single flow: 50 ~ 1000t / h;
The maximum operating temperature is 70 degrees higher temperature need to be specially made;
Filtration precision: 50 ~ 4500μm;
Working pressure: 1.0MPa, 1.6MPa, 2.5MPa, 4.0MPa;
Minimum working pressure: 0.1MPa;
Cleaning time is 15 ~ 60s, can be set in accordance with the actual situation of the site;
Cleaning pressure loss is 0.01MPa;
Control modes: manual, time pressure;
Operating voltage: 3 phase 220/380/440VAC 50/60Hz
Product advantages
(1) easy to install
* Can be directly installed on the pipe * No need to filter
(2) the high degree of automation
* PLC systems can implement limited to intelligent control
* Automatic cleaning and sewage
* The control system is responsive and accurate, run
* No manual, easy operation and management
Filter backwash water, consume less, usually less than 1 to 3 percent of the total of filter backwash system to work, continue
to flow.
. Filter all internal components are resistant to rust, corrosion-resistant material, or special handling.
(5) the price is reasonable.
